Duck is done and for sale. For 900 bucks you can have her!
Friday, March 14, 2014
Tuesday, April 23, 2013
Back to the duck
I got the fore deck on the boat. Did this one a little differently. On the first two ducks I made the deck seam at the cross member That let a small addition to the side decks at the transom. With this duck I put the side decks on first from the stern fwd. That left a about a 6 inch gap at fwd area aft of the fore deck I cut the deck large enough to fit from that gap to the bow. The decks are now just 3 pieces.
Wednesday, April 17, 2013
Slow duck
Slow progress on the duck. I've had other boats on my mind. I did get the side decks on. Need to get some more wood for the foredeck.
Wednesday, March 27, 2013
Off the forms
I decided to tale the boat off the forms and do the glass work later. I'll be working on the decks next.
Tuesday, March 26, 2013
Bull nose
Not much done today, Got the bull nose on and faired the bottom. Going to Annapolis tomorrow to get some fiberglass.
Monday, March 25, 2013
Bottom glued
I got the bottom glued and screwed on. I used titebond II glue and ring shanked nails around the chine. In the field I used #8 3/4 inch SS screws. I ran the router around the edge. That's one advantage for using glue over resin. You can do the routing the same day. The other is cost. I'll make a bow block later.
Saturday, March 23, 2013
Thursday, March 21, 2013
Wednesday, March 20, 2013
Back on the duck
I had a few weeks where I had family matters to attend to so the duck languished. But now I'm back...
I got one side on. I'm using thickend resin for the sides and I'll use titebond II glue for the bottom.
I got one side on. I'm using thickend resin for the sides and I'll use titebond II glue for the bottom.
Saturday, March 2, 2013
Big Duck!!
I've got too many boat projects open.. My son Shane and I bought a big boat. An Alberg 30. This is a classic sail boat. We are on target with that boat for an early spring sail. The boat is currently lying in Baltimore right around the corner from the Inner Harbor. When we leave we will have to take a spin around the harbor... I'll post pix from time to time.
As for the Duck, I got the shear and chine installed.
As for the Duck, I got the shear and chine installed.
Wednesday, February 27, 2013
New Duck!
I had so much fun building the last two ducks that I thought I'd do another one. Maby I'll even try this one out!
Tuesday, December 4, 2012
Duck is done
I finished up the paint and varnish. This boat is done. I started this project Oct 15. My goal was 6 weeks. I think I can say I made it...
Sunday, December 2, 2012
Bottom paint
I got two coats of paint on the bottom. I sprayed it with my Critter sprayer. The Critter takes Mason Ball jars as the paint can. It's good that way because you can seal the paint back up for use later. I'll probably do one more coat tomorrow.
Wednesday, November 21, 2012
Woodwork is done
It's the day before Thanksgiving and I just got all the woodwork done on the duck. She is a fine looking boat. I'm going to stain the decks red mahogany, and paint the bottom and sides brown. That way if a buyer wants to camo the boat the base is already on. The last section was the floorboards. I rough fit each side then scribed them to the hull. Then I center lined one side then scribed the other side to it. Nice tight fit. After paint I'll screw them down. No glue for these. They need to be removable. I also got the deck stained.
Monday, November 19, 2012
Rub rails
I forgot the rubrails. They provide two functions. They act as bumpers if you hit something, they act as splash boards, and they look good. Ops, that's 3 things...
Saturday, November 17, 2012
Inner rails
I got the boat back right side up. The bottom is done but without paint. I'll wait until the entire boat is done then paint. I fitted the inner rails and the splash board. I'll glue them this afternoon. Last bit of wood work is the floorboards. That consists of 1/4 inch ply split down the middle and fitted to the inner bottom.
Should be done by thanksgiving.
Should be done by thanksgiving.
Friday, November 9, 2012
Glass on the bottom
I got the bottom glassed. Not going to do the sides on this boat. Doesn't need it. Another coat of resin and then paint.
Before
After
Before
After
Monday, November 5, 2012
Friday, November 2, 2012
Decks
I got the fwd deck on. I coated the underside with resin and then glued and nailed the deck. Side decks are next.
Subscribe to:
Posts (Atom)















